Operation Manual

Call Schedule Setup
8
-
2
Call Schedule facility is used to control the router's dialer or connection
manager what time should be up or down according to the pre-defined call
schedule profiles. Before configuring the Call Schedule function, you have
to set up time function properly and arrange schedules for specified Internet
access profile or LAN-to-LAN profile.
On the Time Setup menu, if you press Inquire Time button, the router’s
clock will be set to current time of your PC. The clock will reset if you power
down or reset the router so you may prefer to use an NTP server on the
Internet (a time server) to update the clock automatically. NTP updates only
occur when the router is online to the Internet; they will not trigger calls
themselves.
You can have up to 15 entries of different schedules and you must then apply
the required schedule(s) to the appropriate ISP by entering the schedule
number into the ISP setup:
Applications >>Call Schedule Setup