Operation Manual

NAT Setup
5-4
4
As shown above, the Port Redirection Table provides10 port-mapping
entries for internal hosts.
Service Name
Specify the name for the specific network service.
Protocol
Specify the transport layer protocol (TCP or UDP).
Public Port
Specify which port should be redirected to the internal host.
Private IP
Specify the private IP address of the internal host offering the
service.
Private Port
Specify the private port number of the service offered by the internal
host.
Active
Check here to activate the port-mapping entry.
Because the router has its own built-in web server for the configuration, if
you want to access to the web configurator remotely and to a web server
behind the router, you need to change the router’s http “port” to something