Operation Manual

Internet Access Setup
3-9
WAN IP Network Settings
Obtain an IP address
automatically
The option must be enabled.
Router Name Depending on your Cable ISP, this option may
or may not be left blank. Some ISPs require
this name for access authentication.
Domain Name Depending on your Cable ISP this field may or
may not be left blank.
Default MAC Address
& Specify a MAC
Address
These two options are mutually exclusive.
Some Cable ISPs use a specific MAC address
for access authentication. In such cases you
need to check the Specify a MAC Address
box and enter the MAC address in the MAC
Address fields. Click OK and restart the router
to allow the settings to take affect.
3.2.4 Using PPTP with a DSL Modem
Click Internet Access Setup > PPTP to enter the setup page, as shown
below. Herein, we use an example to explain the corresponding setting.
The exact settings should be provided by your DSL service provider.