Operation Manual

Online Status
2-3
2.2.3 WAN Status
Mode Indicate which broadband access mode is active.
Depending upon the access mode, you may see PPPoE,
PPTP, PPPoA, or Static IP or DHCP.
GW IP Addr The gateway IP address.
IP Address IP address of the WAN interface.
TX Packets Total number of transmitted IP packets during this
connection session.
TX Rate Transmission rate in characters per second (cps) for
outgoing data.
RX Packets
Total number of received IP packets during this connection
session.
RX Rate
Reception rate in characters per second (cps) for incoming
data.
Up Time
Connection time. The format is HH:MM:SS, where HH,
MM, and SS, indicate hours, minutes, and seconds,
respectively.
Drop/Dial
PPPoE or
PPTP
Click the link to dial/or disconnect the PPPoE or PPTP
connection.