Operation Manual

Vigor160 Series User’s Guide
45
Available settings are explained as follows:
Item Description
Enable Channel Check it to enable this channel.
WAN Type The connections and interfaces created in every channel may
select a specific WAN type to be built upon.
General Settings VPI - Type in the value provided by your ISP.
VCI - Type in the value provided by your ISP.
Protocol - Select a proper protocol for this channel.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header – Check the box to enable VLAN tag
configuration.
VLAN Tag – Type the value as the VLAN ID number. Valid
settings are in the range from 1 to 4095. The network traffic
flowing on each channel will be identified by the system via
their VLAN Tags. Channels using the same WAN type may not