Operation Manual

Vigor160 Series User’s Guide
4
4
 IPTV - The IPTV configuration will allow the WAN
interface to send IGMP packets to IPTV servers.
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference. TTL
value is set by telnet command.
PPPoE/PPPoA Client Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Access Setup
 ISP Name – Type in the name of your ISP.
 Username – Type in the username provided by ISP in
this field. The maximum length of the name you can set
is 80 characters.
 Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set
is 48 characters.
 PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
 Always On – Check it to keep the network connection
always.
Idle Timeout – Set the timeout for breaking down the
Internet after passing through the time without any
action.
IP Address From ISP
 Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.
MPoA (RFC1483/2684) Obtain an IP address automatically – Click this button to
obtain the IP address automatically.
 Router Name – Type in the router name provided by
ISP.
 Domain Name – Type in the domain name that you have
assigned.
Specify an IP address – Click this radio button to specify
some data.
 IP Address – Type in the private IP address.
 Subnet Mask – Type in the subnet mask.
 Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address for
the router if you want to use Static IP mode. If necessary,
type in secondary IP address for necessity in the future.
After finished the above settings, click OK to save the settings and return to previous page.
Click any index 6 to get the following web page: