Operation Manual

Vigor160 Series User’s Guide
299
addr1:subnet – It means the subnet address with start IP address.
Please type the subnet and the IP address, for example, “-l
172.16.3.9:255.255.0.0”.0
any – It means Any address. Simple type “-l” to specify any address
for this command.
-p <DSCP id> Specify the ID.
-s <Service type> Specify the service type by typing the number. The available types
are listed as below:
1:ANY 2:DNS 3:FTP 4:GRE 5:H.323
6:HTTP 7:HTTPS 8:IKE 9:IPSEC-AH 10:IPSEC-ESP
11:IRC 12:L2TP 13:NEWS 14:NFS 15:NNTP
16:PING 17:POP3 18:PPTP 19:REAL-AUDIO 20:RTSP
21:SFTP 22:SIP 23:SMTP 24:SNMP 25:SNMP-TRAPS
26:SQL-NET 27:SSH 28:SYSLOG 29:TELNET 30:TFTP
-S <d/s> Show the content for specified DSCP ID/Service type.
-V <1/2/3> Show the rule in the specified class.
[…] It means that you can type in several commands in one line.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
> qos class -c 2 -n draytek -a -m 1 -l 192.168.1.50:192.168.1.80
Following setting will set in the class2
class 2 name set to draytek
Add a rule in class2
Class2 the 1 rule enabled
Set local address type to Range, 192.168.1.50:192.168.1.80