Operation Manual

Vigor160 Series User’s Guide
96
settings.
Viewing IPv6 Routing
Table
Displays the routing table for your reference.
Index The number (1 to 40) under Index allows you to open next
page to set up static route.
Enable Check the box to enable such static route.
Destination Address Displays the destination address of the static route.
Backup Click it to backup current settings of static route as a file.
Restore Click it to restore static route configuration file.
Click any underline of index number to get the following page.
Available settings are explained as follows:
Item Description
Enable Click it to enable this profile.
Destination IPv6 Address /
Prefix Len
Type the IP address with the prefix length for this entry.
Gateway IPv6 Address Type the gateway address for this entry.
Network Interface Use the drop down list to specify an interface for this static
route.
When you finish the configuration, please click OK to save and exit this page.