User`s guide

Vigor2760 Series User’s Guide
71
priority for such VLAN. The range is from 0 to 7.
ATM OoS Such option is available only when WAN1 is connected
with the type of ADSL.
QoS Type - Select a proper QoS type for the channel.
Type the values for PCR, SCR and MBS respectively.
Bridge mode
Enable – Click it to enable Bridge mode for such channel.
Physical Members – Group the physical ports by checking
the corresponding check box(es) for applying the bridge
connection.
After finished the above settings, click OK to save the settings.
WAN links for Channel 4, 5 and 6 are provided for router-borne application such as TR-069.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 4, 5 and 6 to configure your router.