User`s guide

Vigor2760 Series User’s Guide
177
Index
Click the number below Index to access into the setting
page.
Profile
Display the name of the LAN DNS profile.
Domain Name
Display the domain name of the LAN DNS profile.
You can set up to 20 LAN DNS profiles.
To create a LAN DNS profile:
1. Click any index, say Index No. 1.
2. The detailed settings with index 1 are shown below.
Available settings are explained as follows:
Item Description
Enable
Check this box to enable such profile.
Profile
Type a name for such profile.
Domain Name
Type the domain name for such profile.
IP Address List
The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
maps with one IP address. If required, you can configure
two IP addresses mapping with the same domain name.
Add – Click it to open a dialog to type the host’s IP
address.