User`s guide

Vigor2760 Series User’s Guide
8
Interface Description
PWR Connector for power adapter.
I / O Power switch.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you see
the ACT LED begins to blink rapidly than usual, release the button. Then
the router will restart with the factory default configuration.
WLAN
ON/OFF/WPS
WLAN WPS - Press this button for 2 seconds to wait for client device making
network connection through WPS. When the LED lights up, the WPS connection
will be on.
WLAN ON/OFF - Press the button once to enable (WLAN LED on) or disable
(WLAN LED off) wireless connection.
VDSL/ADSL RJ-11 connector for accessing the Internet (WAN1)
USB (1-2) Connector for USB storage device, printer or 3G/4G modem (WAN3)
LAN (1-4)
(or WAN2)
RJ-45 Gigabit Ethernet connectors for local network devices. When
WAN2 is enabled, LAN Port 4 becomes WAN2 (Ethernet) and WAN1
(RJ11) is disabled.