User`s guide

Vigor2760 Series User’s Guide
6
Interface Description
PWR Connector for power adapter.
I / O
Power switch.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
VDSL/ADSL RJ11 connector for accessing the Internet.
USB (1-2) Connector for USB storage device, printer or 3G/4G modem (WAN3)
LAN (1-4)
Or WAN2
RJ-45 Gigabit Ethernet connectors for local network devices. When
WAN2 is enabled, LAN Port 4 becomes WAN2 (Ethernet) and WAN1
(RJ11) is disabled.