Operation Manual

Vigor122 User’s Guide
65
relational settings listed below:
Server IP – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a
number as the minimum period. The default setting is “60
seconds”.
Maximum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a
number as the maximum period. A value of “-1” indicates
that no maximum period is specified.
After finishing all the settings here, please click OK to save the configuration.
I
I
V
V
-
-
1
1
-
-
3
3
A
A
d
d
m
m
i
i
n
n
i
i
s
s
t
t
r
r
a
a
t
t
o
o
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password.
Available settings are explained as follows:
Item Description
Administrator Password Old Password - Type in the old password. The factory default
setting for password is “admin”.
New Password -Type in new password in this field. The
length of the password is limited to 23 characters.
Confirm Password -Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access into
the web user interface again.