Operation Manual

Vigor122 User’s Guide
43
Office
Hour:
(Force On)
Mon - Sun 9:00 am to 6:00 pm
1. Make sure the PPPoE connection and Time Setup is working properly.
2. Configure the PPPoE always on from 9:00 to 18:00 for whole week.
3. Configure the Force Down from 18:00 to next day 9:00 for whole week.
4. Assign these two profiles to the PPPoE Internet access profile. Now, the PPPoE Internet
connection will follow the schedule order to perform Force On or Force Down action
according to the time plan that has been pre-defined in the schedule profiles.
I
I
I
I
-
-
4
4
-
-
3
3
U
U
P
P
n
n
P
P
The UPnP (Universal Plug and Play) protocol is supported to bring to network connected
devices the ease of installation and configuration which is already available for directly
connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT routers,
the major feature of UPnP on the modem is “NAT Traversal”. This enables applications inside
the firewall to automatically open the ports that they need to pass through a router.
Info UPnP is required for some applications such as PPS, Skype, eMule...and etc.
If you are not familiar with UPnP, it is suggested to turn off this function for
security.
Available settings are explained as follows:
Item Description
Enable UPNP Service Accordingly, you can enable either the Connection Control
Service or Connection Status Service.
Default WAN It is used to specify the WAN interface for applying such
function.