Operation Manual

Vigor122 User’s Guide
26
WAN link for Channel 3, 4 are provided for modem-borne application such as TR-069 and VoIP.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 3 or 4 to configure your modem.
Available settings are explained as follows:
Item Description
WAN for Router-borne
Application
Management can be specified for general management (Web
configuration/telnet/TR069). If you choose Management,
the configuration for this VLAN will be effective for Web
configuration/telnet/TR069.
DSL Modem Settings Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
QoS Type - Drop down the list to choose the type provided by
ISP.
Protocol - Drop down the list to choose the one provided by
ISP.
Encapsulation - Drop down the list to choose the type
provided by ISP.
After finished the above settings, click OK to save the settings and return to previous page.