Operation Manual

Vigor122 User’s Guide
15
the network.
Auto detect Click it to detect suitable values below by the modem
automatically.
Protocol/Encapsulatio
n
Select an IP mode for this WAN interface. There are several
available modes for Internet access such as 1483 Routed IP
or 1483 Bridged IP.
Fixed IP Click Yes to specify a fixed IP for the modem. Otherwise,
click No (Dynamic IP) to allow the modem choosing a
dynamic IP. If you choose No, the following IP Address,
Subnet Mask and Default Gateway will not be changed.
IP Address Assign an IP address for the protocol that you select.
Subnet Mask Assign a subnet mask value for the protocol of MPoA/Static
or Dynamic IP.
Default Gateway Assign an IP address to the gateway for the protocol of
MPoA/Static or Dynamic IP.
Primary DNS Assign an IP address to the primary DNS.
Second DNS Assign an IP address to the secondary DNS.
4. Please type in the IP address information originally provided by your ISP. Then click Next
for next step.
5. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
6. Now, you can enjoy surfing on the Internet.