Operation Manual

Vigor1000 Series User’s Guide
82
4
4
.
.
2
2
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page provides you the general settings for LAN.
Click LAN to open the LAN settings page and choose General Setup.
Available settings are explained as follows:
Item Description
LAN IP Network
Configuration
For NAT Usage
IP Address - Type in private IP address for connecting to a
local private network (Default: 192.168.1.1).
Subnet Mask- Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24)
For IP Routing Usage
Click Enable to invoke this function. The default setting is
Disable.
IP Address- Type in secondary IP address for connecting to
a subnet. (Default: 192.168.2.1/ 24)
Subnet Mask- An address code that determines the size of
the network. (Default: 255.255.255.0/ 24)
PPPoE Passthrough- The router offers PPPoE dial-up
connection. Besides, you also can establish the PPPoE
connection directly from local clients to your ISP via the
Vigor router. When PPPoA protocol is selected, the PPPoE
package transmitted by PC will be transformed into PPPoA
package and sent to WAN server. Thus, the PC can access
Internet through such direction.