Operation Manual

Vigor1000 Series User’s Guide
77
After finishing all the settings here, please click OK to activate them.
4
4
.
.
1
1
.
.
4
4
B
B
a
a
c
c
k
k
u
u
p
p
This page is used to setup 3G/56K backup function. If you enable 3G/56K backup, make sure
your WAN connection type is not in 3G/56K mode. When the WAN connection is broken,
router will try to keep the connection with 3G/56K mode. After WAN connection is recovered,
router will disconnect the 3G/56K connection automatically.
If both USB ports connected with 3G modem and 56K modem, and both 3G Backup and 56K
Backup modes are enabled, the system will determine which one (3G Backup or 56K Backup)
will be selected as backup mode according to the detected physical connection automatically.