Operation Manual

Vigor1000 Series User’s Guide
75
When PPPoE is selected as connection type, you need to configure the following settings:
Available settings are explained as follows:
Item Description
Username
Type the name obtained from the ISP.
Password
Type the password obtained from the ISP.
Confirm Password
Type the password again for confirmation.
MTU Size
It means Max Transmit Unit for packet. The default setting
will be specified by the system automatically. Therefore,
keep this field in blank.
After finishing all the settings here, please click OK to activate them.
4
4
.
.
1
1
.
.
3
3
P
P
o
o
r
r
t
t
s
s
Ports page is used to change the setting for WAN port. You can set or reset the following
items. All of them are described in detail below.
Available settings are explained as follows:
Item Description
Port
It displays current network interface.
Link
It displays current connection status. Green light means the
WAN connection is successful.
Speed Current
It displays current speed that the router uses.