Operation Manual

Vigor1000 Series User’s Guide
62
Available settings are explained as follows:
Item Description
WAN IP Configuration
Enable - Check the box to enable the WAN IP configuration.
Connection Type -the WAN modes. The corresponding page
will be displayed.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using. Such function can be
applied to each connection type.
Below shows the configuration page for each connection type:
S
S
t
t
a
a
t
t
i
i
c
c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static as the accessing protocol of the internet, please choose Static mode from
Connection Type drop down menu. The following web page will be shown.