Operation Manual

Vigor1000 Series User’s Guide
44
2. Enable it and give it a name. In this example the profile name is “test”.
3. Select Dial-Out as Call Direction and enable Always on.
4. Select IPSec Tunnel and enter Vigor1000’s WAN IP address in the Server IP/Host
Name for VPN field.
5. Setup a pre-shared key, which must be the same as in Vigor1000.
6. Select ESP (High) and 3DES with Authentication.
7. Press the Advanced button.
8. In the pop-up window, please select Aggressive mode and select “DES_MD5_G2/
DES_SHA1_G2/3DES_MD5_G2/3DES_SHA1_G2” as IKE phase 1 proposal. Enter
vigor2820 in the Local ID field. Click OK to return to the profile setting page.
9. Enter Vigor1000’s private network in the Remote Network IP / Mask field.
10. Click OK.