Operation Manual

Vigor1000 Series User’s Guide

6. Setup a pre-shared key, which must be the same as in Vigor1000.

7. Enter Vigor1000’s private network in the Remote Network IP / Mask field.

8. Click OK.

Note: Vigor1000 supports the following proposals by default.

For phase 1,

Mode Selection Proposals will be sent

When you select Automatic 3DES, MD5, Group 5;

3DES, SHA1, Group 5;

3DES, SHA1, Group 2;

3DES, MD5, Group 2;

When you select 3DES 3DES, MD5, Group 5;

3DES, SHA1, Group 5;

3DES, SHA1, Group 2;

3DES, MD5, Group 2;

When you select AES(any) AES, MD5, Group 5;

AES, SHA1, Group 5;

AES, MD5, Group 2;

AES, SHA1, Group 2;

When you select AES-128 AES-128, MD5, Group 5;

AES-128, SHA1, Group 5;

AES-128, MD5, Group 2;

AES-128, SHA1, Group 2;

When you select AES-192 AES-192, MD5, Group 5;

AES-192, SHA1, Group 5;

AES-192, MD5, Group 2;

AES-192, SHA1, Group 2;

When you select AES-256 AES-256, MD5, Group 5;

AES-256, SHA1, Group 5;

AES-256, MD5, Group 2;

AES-256, SHA1, Group 2;

For phase 2,

Mode Selection Proposals will be sent

When you select Automatic AES, SHA1;

AES, MD5;

3DES, SHA1;

3DES, MD5;

When you select 3DES 3DES, MD5;

3DES, SHA1;

When you select AES(any) AES-256, MD5;

AES-256, SHA1;

When you select AES-128 AES-128, MD5;

AES-128, SHA1;

When you select AES-192 AES-192, MD5;

AES-192, SHA1;

When you select AES-256 AES-256, MD5;

AES-256, SHA1;