Operation Manual

Vigor1000 Series User’s Guide
32
3. Enter Vigor2820’s WAN IP address in the Remote IP field.
4. Select Main Mode as IKE phase 1 mode.
5. Setup a pre-shared key, which must be the same as in Vigor2820.
6. Enter Vigor1000’s private network in the Local Network / Mask field. Enter
Vigor2820’s private network in the Remote Network / Mask field.
7. Use default value “Automatic” for IKE phase 1 and phase 2 proposals.
8. Click OK.
9. Accessing the VPN network of Vigor2820 from a PC behind Vigor1000 to initiate the
VPN connection, for example, ping 192.168.1.x from a PC (192.168.30.x). Vigor1000
will be triggered to dial the IPSec VPN to Vigor2820. After the VPN is connected, you
can monitor the status.