Operation Manual

Vigor1000 Series User’s Guide
23
Available settings are explained as follows:
Item Description
Type
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication. Select WPA, WPA2 or Auto as
WPA mode.
WPA Algorithm
Choose the WPA algorithm, TKIP, AES or Auto.
Server IP Address
Enter the IP address of RADIUS server.
Destination Port
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
W
W
P
P
S
S
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption of
WPA and WPA2.
If you choose WPS as the security configuration, you can press Start WPS PIN and Start WPS
PBC to complete the wireless connection.