Operation Manual

Vigor1000 Series User’s Guide
243
4
4
.
.
1
1
5
5
.
.
8
8
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Available settings are explained as follows
Item Description
Allow management from the
Internet
Enable HTTP/HTTPS/SSH/ICMP Ping/FTP/TELNET -
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the router from Internet.
Check the box(es) to specify.
Enable SNMP
Check it to enable such service.
Manager Host IP – Set one host as the manager to execute
SNMP function. Type the IP address to specify the certain
host.
Access List
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.