Operation Manual

Vigor1000 Series User’s Guide
234
Item Description
VigorACS}:8080/ACSServer/services/UnAuthACSServlet
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want to
use such CPE with VigorACS, you can type as the following:
Username: acs
Password: password
CPE Settings
Such information is useful for Auto Configuration Server.
Enable – Check the box to allow the CPE Client to connect
with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred. To solve
such problem, you might change port number for CPE.
Username – Type a name for VigorACS to access into Vigor
router’s web configurator.
Password –Type a password for VigorACS to access into
Vigor router’s web configurator.
Periodic Inform Settings
Enable – Check the box for the system to send inform
message to ACS server periodically (with the time set in the
box of interval time).
Interval Time - Please set interval time or schedule time for
the router to send notification to CPE. Or uncheck Enable to
close the mechanism of notification.
4
4
.
.
1
1
5
5
.
.
3
3
S
S
y
y
s
s
t
t
e
e
m
m
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for admin operation.
Available settings are explained as follows
Item Description
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this filed.
Confirm Password
Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.