Operation Manual

Vigor1000 Series User’s Guide

233

Vigor router with TR-069 is available for matching with VigorACS server. Such page

provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here

is for CPE to be controlled and managed with VigorACS server. Users need to type URL,

username and password for the VigorACS server that such device will be connected. However

URL, username and password under CPE client are fixed that users cannot change it. The

default CPE username and password are "vigor" and "password". You will need it when you

configure VigorACS server.

Available settings are explained as follows:

Item Description

ACS and CEP Settings

ACS Server On – Choose the interface for the router

connecting to ACS server.

ACS Settings

Such data must be typed according to the ACS (Auto

Configuration Server) you want to link. Please refer to

VigorACS user’s manual for detailed information.

URL - Type the URL for VigorACS server.

If the connected CPE needs to be authenticated, please set

URL as the following and type username and password for

VigorACS server:

http://{IP address of

VigorACS}:8080/ACSServer/services/ACSServlet

If the connected CPE does not need to be authenticated

please set URL as the following:

http://{IP address of