Operation Manual

Vigor1000 Series User’s Guide
210
is very useful when the network traffic congestion occurs
and it still can remain the accuracy of DTMF tone.
SIP INFO- Choose this one then the Vigor will capture the
DTMF tone and transfer it into SIP form. Then it will be
sent to the remote end with SIP message.
Payload Type (rfc2833) - Choose a number from 96 to
127, the default value was 101. This setting is available for
the OutBand (RFC2833) mode.
4
4
.
.
1
1
2
2
.
.
4
4
S
S
t
t
a
a
t
t
u
u
s
s
From this page, you can find codec, connection and other important call status for each port.
Each item is explained as follows:
Item Description
Auto-refresh
Check this box to enable an automatic refresh of the page
at regular intervals.
Refresh
Click it to reload the page.
Port
It shows the VoIP connection status.
IDLE - Indicates that the VoIP function is idle.
HANG_UP - Indicates that the connection is not
established (busy tone).
CONNECTING - Indicates that the user is calling out.
WAIT_ANS - Indicates that a connection is launched and
waiting for remote user’s answer.
ALERTING - Indicates that a call is coming.
ACTIVE-Indicates that the VoIP connection is launched.
Codec
Indicates the voice codec employed by present channel.
PeerID
The present in-call or out-call peer ID (the format may be