Operation Manual

Vigor1000 Series User’s Guide
205
4
4
.
.
1
1
2
2
.
.
3
3
P
P
h
h
o
o
n
n
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
This page allows user to set phone settings for Phone 1 and Phone 2 respectively. However, it
changes slightly according to different model you have.
Available settings are explained as follows:
Item Description
Phone List
Port – there are two phone ports provided here for you to
configure. Phone1/Phone2 allows you to set general
settings for PSTN phones.
Call Feature – A brief description for call feature will be
shown in this field for your reference.
Codec – Display the codec used for such phone entry.
Gain - Display the volume gain settings for Mic/Speaker
that configured in the advanced settings page of Phone
Index.
Default SIP Account – “draytel_1” is the default SIP
account. You can click the number below the Index field to
change SIP account for each phone port.
DTMF Relay – Display DTMF mode that configured in
the advanced settings page of Phone Index.
Tone Settings
Region – Select the proper region which you are located. If
you cannot find out a suitable one, please choose User
Defined and fill out the corresponding values for dial tone,
ringing tone, busy tone, congestion tone by yourself for
VoIP phone. If you choose User Defined, the Advanced
button will be available for you to click to set the detailed
configuration.
Advanced setting allows you to adjust tone settings
manually if you choose User Defined. TOn1, TOff1, TOn2
and TOff2 mean the cadence of the tone pattern. TOn1 and
TOn2 represent sound-on; TOff1 and TOff2 represent the
sound-off.