Operation Manual

Vigor1000 Series User’s Guide
193
Available settings are explained as follows:
Item Description
Enable Temperature
Sensor
Enable – Enable the function of temperature sensor.
Disable – Disable the function.
Display Unit
Choose the display unit of the temperature. There are two
types for you to choose.
Temperature Alert
Type the upper limit and lower limit for the system to send
out temperature alert.
Calibration
Type a value used for correcting the temperature error.
Send Temperature Log to
Syslog Agent
Check the box to enable this function. The temperature log
will be recorded on Syslog.
Send Alert to E-Mail.
Check the box to enable this function. The alert will be sent
to the e-mail address that you offer on the page of System
Maintenance>>Syslog / Mail Alert Setup.
Send alarm to the SMS app
Check the box to enable this function.
SMS Profile
Use the drop down list to choose a SMS profile for sending
the alarm.
OK
Save the settings.
Cancel
Cancel the settings.
Below shows an example of temperature graph:
Current temperature, maximum temperature, minimum temperature and average temperature
will be displayed on the screen.