Operation Manual

Vigor1000 Series User’s Guide
131
Available settings are explained as follows:
Item Description
Ethernet Type
Value
Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
z If you choose VLAN ID as QCE Type, you have to type the ID number for it and specify
traffic class from Low, Normal, Medium and High.
z If you choose TCP/UDP Port as QCE Type, you have to type the port number for it and
specify traffic class from Low, Normal, Medium and High.
Available settings are explained as follows:
Item Description
TCP/UDP Port
Click Single or Range. If you select Range, you have to
type in the starting port number and the end porting number
on the boxes below.
TCP/UDP Port
Range
Type in the starting port number and the end porting
number here if you choose Range as the type.