Operation Manual

Vigor1000 Series User’s Guide
116
Available settings are explained as follows:
Item Description
Enable
Check the box to enable such rule.
Name
Type a name of the rule for identification.
Source
Specify the interface for the starting point.
Destination
Specify the interface for the ending point.
Protocol
Specify the protocol(s) which this filter rule will apply to.
Source Port / Destination
Port
Type a fixed port number or a range of port number for
such rule. Available value is 1 ~ 65535.
Source Address /
Destination Address
Type WAN IP or LAN IP address based on the WAN or
LAN interface specified in Source / Destination fields.
Note that the format for this field must be “address[/mask]”,
e.g, 192.168.1.123 or 172.16.9.0/24.
Source MAC Address
Specify the MAC address for the packets.
Action
Choose the action to perform for the filtered packet.
Accept – Packets matching with such rule can pass through
the router.
Drop - Packets matching with such rule will be discarded
immediately.
Reject - Packets matching with such rule cannot pass
through the router and become packets with TCP reset or
ICMP port unreachable packets.