Operation Manual

Vigor1000 Series User’s Guide
114
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose Other as IP Protocol Filter, you will get the page as the following:
Item Description
IP Parameters
IP Protocol Value -When "Other" is selected for the IP
protocol filter, you can enter a specific value here. The
range is 0 to 255. The default value is “255”.A frame
meeting this ACE matches this IP protocol value.
Source IP -Specify the source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the source IP
Address and source IP Mask fields that appear.
Source IP Address-Type the source IP Address here. This
option is available when you choose Host or Network as
source IP Filter.
Source IP Mask-Type the source IP Mask here. This
option is available only when you choose Network as
source IP.
Dest IP-Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the destination IP Address field
that appears.
Network: Destination IP is set to Network. Specify the