Operation Manual

Vigor1000 Series User’s Guide
113
TCP Parameters
TCP FIN-Specify the TCP "No more data from sender"
(FIN) value for this ACE.
0: TCP frames where the FIN field is set must not be able
to match this entry.
1: TCP frames where the FIN field is set must be able to
match this entry.
Any: Any value is allowed.
TCP SYN-Specify the TCP "Synchronize sequence
numbers" (SYN) value for this ACE.
0: TCP frames where the SYN field is set must not be
able to match this entry.
1: TCP frames where the SYN field is set must be able to
match this entry.
Any: Any value is allowed.
TCP RST-Specify the TCP RST value for this ACE.
0: TCP frames where the RST field is set must not be
able to match this entry.
1: TCP frames where the RST field is set must be able to
match this entry.
Any: Any value is allowed.
TCP PSH -Specify the TCP "Push Function" (PSH) value
for this ACE.
0: TCP frames where the PSH field is set must not be
able to match this entry.
1: TCP frames where the PSH field is set must be able to
match this entry.
Any: Any value is allowed.
TCP ACK-Specify the TCP "Acknowledgment field
significant" (ACK) value for this ACE.
0: TCP frames where the ACK field is set must not be
able to match this entry.
1: TCP frames where the ACK field is set must be able to
match this entry.
An
y
: An
y
value is allowed