Operation Manual

Vigor1000 Series User’s Guide
3
1
1
.
.
3
3
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
1
1
0
0
0
0
0
0
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled. HPA
(Hardware
Packet
Accelerate)
Off Hardware NAT is disabled.
On The WAN port is connected. WAN
Blinking It will blink while transmitting data.
On The port is connected.
Off The port is disconnected.
LAN1/2/3/4
Blinking The data is transmitting.
USB1/2 On A USB device is connected and active.
VPN On The VPN tunnel is active.
QoS
On The QoS function is active.
On
(Green)
Wireless access point is ready.
Blinking
(Green)
Data transmitting via WLAN.
Blinking
(Orange)
Quickly: WPS function is enabled.
Slowly: Data transmitting via WPS.
WLAN
/WPS
Off Wireless access point is turned off.
Interface Description
WPS Press WPS Button to wait for client device making network connection through
WPS. When the LED lights up, the WPS connection will be on.
WLAN Press the button once to enable (WLAN LED on) or disable (WLAN LED off)
wireless connection.
LAN (1-4) Connectors for local networked devices.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR Connector for a power adapter.
ON/OFF
Power switch.
USB (1-2)
Connector for USB storage device (Pen Driver/Mobile HD) or printer or 3G backup.
WAN
Connector for accessing the Internet.