Operation Manual

Vigor1000 Series User’s Guide
96
Protocol
Specify the transport layer protocol. It could be TCP, UDP
and TCP+UDP.
WAN IP
Specify one WAN IP address to be used by such profile.
The default setting is ALL, which mean such profile can be
applied for all the WAN IP addresses.
Start Port
Specify the starting port number of the service offered by
the local host.
End Port (optional)
Specify the ending port number of the service offered by
the local host.
Local Host
Enter the private IP address of the local host.
Local Port (optional)
If it is configured, the forwarded traffic is mapped to this
port on the local host.
Click OK to save the settings.