Operation Manual

Vigor1000 Series User’s Guide
93
Available settings are explained as follows:
Item Description
Enable
Click this radio button to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect
to Internet.
Disable
Click this radio button to disable this function. All the
settings on this page will be invalid.
Strict Bind
Click this radio button to block the connection of the
IP/MAC which is not listed in IP Bind List.
ARP Table
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can
be selected and added to IP Bind List by clicking Add
below
.
Refresh- It is used to refresh the ARP table. When there is
one new PC added to the LAN, you can click this link to
obtain the newly ARP table information.
Add and Edit
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to
bind with the assigned IP address.
IP Bind List
It displays a list for the IP bind to MAC information.
Add
It allows you to add the one you choose from the ARP table
or the IP/MAC address typed in Add and Edit to the table
of IP Bind List.