User's Manual

Descriptions of Components
LED Status Explanation
Off The system is not ready or is failed. ACT
Blinking The system is ready and can work normally.
On A USB device is connected and active. USB
Blinking The data is transmitting.
On The WAN port is connected. WAN
Blinking It will blink while transmitting data.
On A normal connection is through its corresponding
port.
Off LAN is disconnected.
LAN 1 - 4
Blinking Data is transmitting (sending/receiving).
On Wireless access point is ready.
Off Wireless access point is not ready.
WLAN
(Green LED) on
WLAN button
Blinking
(Green)
Blink when wireless traffic goes through.
Off The WPS is off.
Blinking
(Orange)
Blink with 1 second cycle for 2 minutes - - WPS is
enabled and waiting for wireless client to connect
with it.
WPS
(Orange LED)
on WLAN
button
Blinking
(Orange)
Blink when wireless traffic goes through.
WPS Button Press this button for 2 seconds to wait for client device making
network connection through WPS. When the orange LED lights
up, the WPS will be on.