VigorFly 200 Quick Start Guide Version: 1.01 Date: 19/03/2010 Warranty We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of one (1) year from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase.
Package Content Quick Start Guide CD RJ-45 Cable (Ethernet) RJ-11 to RJ-11 Cable The type of the power adapter depends on the country that the router will be installed: UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type Power Adapter
Descriptions of Components LED Status Explanation ACT Off Blinking On Blinking On Blinking On The system is not ready or is failed. The system is ready and can work normally. A USB device is connected and active. The data is transmitting. The WAN port is connected. It will blink while transmitting data. A normal connection is through its corresponding port. LAN is disconnected. Data is transmitting (sending/receiving). Wireless access point is ready. Wireless access point is not ready.
Interface WAN LAN 1 - 4 USB Description Connecter for accessing the Internet. Connecter for local network devices. Connector for USB storage device (Pen Driver/Mobile HD) or printer or 3G backup. Restore the default settings. Usage: Turn on the router. Press the button and keep for more than 10 seconds. Then the router will restart with the factory default configuration. ON/OFF: Power switch. PWR: Connecter for a power adapter.
Installing Your Router This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. 1. Connect this device to a modem with an Ethernet cable. 2. Connect the LAN port to your computer with a RJ-45 cable. 3. Connect one end of the power adapter to the Power port of this device. Connect the other end to the wall outlet of electricity. 4.
Configuring Web Pages The Quick Start Wizard is designed for you to easily set up your router for Internet access. 1. Make sure your PC connects to the router correctly. 2. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to ask for username and password. For user’s operation, do not type any word on the window and click Login for the simple web pages for configuration.
4. There are four operation modes for you to choose. Simply click any one of them and click Apply. The system will make a connection automatically. 5. The first screen of Quick Start Wizard is entering login account and password. After typing the password, please click Next. 6. On the next page as shown below, please select the Time Zone for the router installed and specify the NTP server(s). Then click Next for next step.
7. On the next page as shown below, please select the appropriate connection type according to the information from your ISP. There are five types offered in this page. Each connection type will bring out different web page. 8. Here we take DHCP type as an example. It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server. For other types, please refer to User’s Guide for detailed information. 9.
. Now you can see the following screen. It indicates that the setup is complete. Different types of connection modes will have different summary. Click Finish and then restart the router. Afterward, you will enjoy surfing on the Internet. Contacting Your Dealer If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.