User's Manual

Descriptions of Components
LED
Status
Explanation
ACT
Off
The system is not ready or is failed.
Blinking
The system is ready and can work normally.
USB
On
A USB device is connected and active.
Blinking
The data is transmitting.
LAN B
On
A normal connection is through its corresponding
port.
Off
LAN is disconnected.
Blinking
Data is transmitting (sending/receiving).
LAN A1 - A4
On
A normal connection is through its corresponding
port.
Off
LAN is disconnected.
Blinking
Data is transmitting (sending/receiving).
WLAN
(Green LED) on
WLAN button
On
Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Off
Press the button and release it within 2 seconds to
turn off the WLAN function.
When the wireless function is not ready, the LED
will be off.
Blinking
(Green)
Data is transmitting (sending/receiving).
WPS
(Orange LED)
on WLAN
button
Blinking
( Orange )
When WPS function is enabled by web user
interface, press this button for more than 2 seconds to
wait for client’s device making network connection
through WPS.
When the orange LED blinks with 1 second cycle for
2 minutes, it means that the AP is waiting for wireless