User`s guide

VigorSwitch P2261 User’s Guide
204
Parameters description:
User Module Legend
User Module Name The full name of a module that may request Port Security
services.
Abbr A one-letter abbreviation of the user module. This is used in
the Users column in the port status table.
Port Status
Port The port number for which the status applies. Click the port
number to see the status for this particular port.
Users Each of the user modules has a column that shows whether
that module has enabled Port Security or not. A '-' means
that the corresponding user module is not enabled, whereas
a letter indicates that the user module abbreviated by that
letter (see Abbr) has enabled port security.
State Shows the current state of the port. It can take one of four
values:
Disabled: No user modules are currently using the Port
Security service.
Ready: The Port Security service is in use by at least one
user module, and is awaiting frames from unknown MAC
addresses to arrive.
Limit Reached: The Port Security service is enabled by at
least the Limit Control user module, and that module has
indicated that the limit is reached and no more MAC
addresses should be taken in.
Shutdown: The Port Security service is enabled by at least
the Limit Control user module, and that module has
indicated that the limit is exceeded. No MAC addresses can
be learned on the port until it is administratively re-opened
on the Limit Control configuration Web-page.
MAC Count (Current, The two columns indicate the number of currently learned