User`s guide

VigorSwitch P2261 User’s Guide
191
authenticated, and all attached clients on the port are
allowed access on this VLAN. The switch will not transmit
an EAPOL Success frame when entering the Guest VLAN.
While in the Guest VLAN, the switch monitors the link for
EAPOL frames, and if one such frame is received, the
switch immediately takes the port out of the Guest VLAN
and starts authenticating the supplicant according to the port
mode. If an EAPOL frame is received, the port will never be
able to go back into the Guest VLAN if the "Allow Guest
VLAN if EAPOL Seen" is disabled.
Port State The current state of the port. It can undertake one of the
following values:
Globally Disabled: NAS is globally disabled.
Link Down: NAS is globally enabled, but there is no link on
the port.
Authorized: The port is in Force Authorized or a
single-supplicant mode and the supplicant is authorized.
Unauthorized: The port is in Force Unauthorized or a
single-supplicant mode and the supplicant is not
successfully authorized by the RADIUS server.
X Auth/Y Unauth: The port is in a multi-supplicant mode.
Currently X clients are authorized and Y are unauthorized.
Restart Two buttons are available for each row. The buttons are
only enabled when authentication is globally enabled and
the port's Admin State is in an EAPOL-based or
MAC-based mode.
Clicking these buttons will not cause settings changed on
the page to take effect.
Reauthenticate: Schedules a reauthentication whenever the
quiet-period of the port runs out (EAPOL-based
authentication). For MAC-based authentication,
reauthentication will be attempted immediately.
The button only has effect for successfully authenticated
clients on the port and will not cause the clients to get
temporarily unauthorized.
Reinitialize: Forces a reinitialization of the clients on the
port and thereby a reauthentication immediately. The clients
will transfer to the unauthorized state while the
reauthentication is in progress.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.