User`s guide

VigorSwitch P2261 User’s Guide
185
on the "Configuration →Security →AAA" page) - the client
is put on hold in the Unauthorized state. The hold timer
does not count during an on-going authentication.
In MAC-based Auth mode, the switch will ignore new
frames coming from the client during the hold time.
The Hold Time can be set to a number between 10 and
1000000 seconds.
RADIUS-Assigned QoS
Enabled
RADIUS-assigned QoS provides a means to centrally
control the traffic class to which traffic coming from a
successfully authenticated supplicant is assigned on the
switch. The RADIUS server must be configured to transmit
special RADIUS attributes to take advantage of this feature
(see RADIUS-Assigned QoS Enabled below for a detailed
description).
The "RADIUS-Assigned QoS Enabled" checkbox provides
a quick way to globally enable/disable RADIUS-server
assigned QoS Class functionality. When checked, the
individual ports' ditto setting determines whether
RADIUS-assigned QoS Class is enabled on that port. When
unchecked, RADIUS-server assigned QoS Class is disabled
on all ports.
RADIUS-Assigned
VLAN Enabled
RADIUS-assigned VLAN provides a means to centrally
control the VLAN on which a successfully authenticated
supplicant is placed on the switch. Incoming traffic will be
classified to and switched on the RADIUS-assigned VLAN.
The RADIUS server must be configured to transmit special
RADIUS attributes to take advantage of this feature (see
RADIUS-Assigned VLAN Enabled below for a detailed
description).
The "RADIUS-Assigned VLAN Enabled" checkbox
provides a quick way to globally enable/disable
RADIUS-server assigned VLAN functionality. When
checked, the individual ports' ditto setting determines
whether RADIUS-assigned VLAN is enabled on that port.
When unchecked, RADIUS-server assigned VLAN is
disabled on all ports.
Guest VLAN Enabled A Guest VLAN is a special VLAN - typically with limited
network access - on which 802.1X-unaware clients are
placed after a network administrator-defined timeout. The
switch follows a set of rules for entering and leaving the
Guest VLAN as listed below.
The "Guest VLAN Enabled" checkbox provides a quick
way to globally enable/disable Guest VLAN functionality.
When checked, the individual ports' ditto setting determines
whether the port can be moved into Guest VLAN. When
unchecked, the ability to move to the Guest VLAN is
disabled on all ports.
Guest VLAN ID This is the value that a port's Port VLAN ID is set to if a
port is moved into the Guest VLAN. It is only changeable if
the Guest VLAN option is globally enabled.
Valid values are in the range [1; 4095].