User`s guide

VigorSwitch P2261 User’s Guide
183
Receive from Client The number of received packets from server.
Receive Agent Option The number of received packets with relay agent
information option.
Replace Agent Option The number of packets which were replaced with relay
agent information option.
Keep Agent Option The number of packets whose relay agent information was
retained.
Drop Agent Option The number of packets that were dropped which were
received with relay agent information.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
2
2
.
.
4
4
.
.
1
1
5
5
N
N
A
A
S
S
–
–
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
Function name:
NAS – General Setup
Function description:
The function is used to configure the NAS parameters of the switch. The NAS server can
be employed to connect users to a variety of resources including Internet access,
conference calls, printing documents on shared printers, or by simply logging on to the
Internet.
It can configure NAS setting of IEEE 802.1X, MAC-based authentication system, and port
settings. The NAS configuration consists of two sections, a system- and a port-wide.
Parameters description:
System Configuration
Mode Indicates if NAS is globally enabled or disabled on the
switchstack. If it is disabled, all ports are allowed
forwarding of frames.
Reauthentication Enabled If checked, successfully authenticated supplicants/clients
are reauthenticated after the interval specified by the