User`s guide

VigorSwitch P2261 User’s Guide
170
status is "don't-care".)
Specific: If you want to filter a specific VLAN ID with
this ACE, choose this value. A field for entering a
VLAN ID number appears.
Tag Priority
Specify the tag priority for this ACE. A frame that hits
this ACE matches this tag priority. The allowed
number range is 0 to 7. The value Any means that no
tag priority is specified (tag priority is "don't-care".)
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
2
2
.
.
4
4
.
.
4
4
A
A
C
C
L
L
–
–
A
A
C
C
L
L
S
S
t
t
a
a
t
t
u
u
s
s
Function name:
ACL – ACL Status
Function description:
The function is used to show the ACL status by different ACL users. Each row describes
the ACE that is defined. It is a conflict if a specific ACE is not applied to the hardware due
to hardware limitations. The maximum number of ACEs is 256 on each switch.
Parameters description:
User Indicates the ACL user.
Ingress Port Indicates the ingress port of the ACE. Possible values are:
Any: The ACE will match any ingress port.
Policy: The ACE will match ingress ports with a specific
policy.
Port: The ACE will match a specific ingress port.
Frame Type Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
EType: The ACE will match Ethernet Type frames. Note
that an Ethernet Type based ACE will not get matched by IP