User`s guide

VigorSwitch P2261 User’s Guide
168
Click the button to add a new ACL, or use the other ACL modification buttons to
specify the editing action (i.e., edit, delete, or moving the relative position of entry in the
list).
Parameters description:
ACE Configuration
Ingress Port Indicates the ingress port of the ACE. Possible values are:
Any: The ACE will match any ingress port.
Policy: The ACE will match ingress ports with a specific
policy.
Port: The ACE will match a specific ingress port.
Policy Filter
Specify the policy number filter for this ACE.
Any: No policy filter is specified. (policy filter status
is "don't-care".)
Specific: If you want to filter a specific policy with
this ACE, choose this value. Two field for entering an
policy value and bitmask appears.
Frame Type Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
EType: The ACE will match Ethernet Type frames. Note
that an Ethernet Type based ACE will not get matched by IP
and ARP frames.
ARP: The ACE will match ARP/RARP frames.
IPv4: The ACE will match all IPv4 frames.
IPv4/ICMP: The ACE will match IPv4 frames with ICMP
protocol.
IPv4/UDP: The ACE will match IPv4 frames with UDP
protocol.
IPv4/TCP: The ACE will match IPv4 frames with TCP
protocol.