User`s guide

VigorSwitch P2261 User’s Guide
167
IPv4/ICMP: The ACE will match IPv4 frames with ICMP
protocol.
IPv4/UDP: The ACE will match IPv4 frames with UDP
protocol.
IPv4/TCP: The ACE will match IPv4 frames with TCP
protocol.
IPv4/Other: The ACE will match IPv4 frames, which are
not ICMP/UDP/TCP.
IPv6: The ACE will match all IPv6 standard frames.
Action Indicates the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and
learned.
Deny: Frames matching the ACE are dropped.
Rate Limiter Indicates the rate limiter number of the ACE. The allowed
range is 1 to 16. When Disabled is displayed, the rate limiter
operation is disabled.
Port Redirect
Indicates the port redirect operation of the ACE.
Frames matching the ACE are copied to the port
number. The allowed values are Disabled or a specific
port number. When Disabled is displayed, the port
copy operation is disabled.
Mirror Specify the mirror operation of this port. The allowed
values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Counter The counter indicates the number of times the ACE was hit
by a frame.
Auto refresh The simple counts will be refreshed automatically on the UI
screen.
Refresh The simple counts will be refreshed manually when user use
mouse to click on “Refresh” button.
Clear The simple counts will be reset to zero when user use mouse
to click on “Clear” button.
Remove All Clean up all ACL configurations on the table.