User`s guide

VigorSwitch P2261 User’s Guide
164
("Deny"). The default value is "Permit".
Rate Limiter ID Select which rate limiter to apply on this port. The allowed
values are Disabled or the values 1 through 16. The default
value is "Disabled".
Port Redirect Select which port frames are copied on. The allowed values
are Disabled or a specific port number. The default value is
"Disabled".
Mirror Specify the mirror operation of this port. The allowed
values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging Specify the logging operation of this port. The allowed
values are:
Enabled: Frames received on the port are stored in the
System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System
Log memory size and logging rate is limited.
Shutdown Specify the port shut down operation of this port. The
allowed values are:
Enabled: If a frame is received on the port, the port will be
disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
State
Specify the port state of this port. The allowed values
are:
Enabled: To reopen ports by changing the volatile port
configuration of the ACL user module.
Disabled: To close ports by changing the volatile port
configuration of the ACL user module.
The default value is "Enabled".
Counter Counts the number of frames that match this ACE.
Refresh The simple counts will be refreshed manually when user use
mouse to click on “Refresh” button.
Clear The simple counts will be reset to zero when user use mouse
to click on “Clear” button.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.