User`s guide

VigorSwitch P2261 User’s Guide
163
100 to 86400.
Apply Click to save changes.
Reset Click to undo any changes made locally and revert to
previously saved values.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
2
2
.
.
4
4
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
2
2
.
.
4
4
.
.
1
1
A
A
C
C
L
L
-
-
P
P
o
o
r
r
t
t
s
s
The switch access control list (ACL) is probably the most commonly used object in the
IOS. It is used for packet filtering but also for selecting types of traffic to be analyzed,
forwarded, or influenced in some way. The ACLs are divided into EtherTypes, IPv4, ARP
protocol, MAC and VLAN parameters, and etc. Here we will just go over the standard and
extended access lists for TCP/IP. As you create ACEs for ingress classification, you can
assign a policy for each port. The policy number is 1-8, however, each policy can be
applied to any port. This makes it very easy to determine what type of ACL policy you will
be working with.
Function name:
ACL - Ports
Function description:
The function is used to configure the ACL parameters (ACE) of the each switch port.
These parameters will affect frames received on a port unless the frame matches a specific
ACE.
Parameters description:
Port The logical port for the settings contained in the same row.
Policy ID Select the policy to apply to this port. The allowed values
are 1 through 8. The default value is 1.
Action Select whether forwarding is permitted ("Permit") or denied