User`s guide

VigorSwitch P2261 User’s Guide
160
Access VLAN It is used to set the Access VLAN ID. It means the switch
port access VLAN ID (AVID). The allowed range is from 1
to 4095.
VLAN Mode It is used to scroll to select the Port Egress Rule. The
allowed values are Hybrid, Trunk or Access. This
parameter affects VLAN egress processing. If Trunk is
selected, a VLAN tag with the classified VLAN ID is
inserted in frames transmitted on the port. This mode is
normally used for ports connected to VLAN aware
switches. If Hybrid (the default value) is selected, if the
classified VLAN ID of a frame transmitted on the port is
different from the Port VLAN ID, a VLAN tag with the
classified VLAN ID is inserted in the frame. If Access is
selected, untag all frames transmitted on the port.
Traffic Class It is used to scroll to select the traffic class for the data
stream priority. The available value from 0 (Low) to 7
(High). If you want the voice has high priority then you can
set the value with 7.
Port Security It is used to scroll to enable or disable the Port Security
function on the Port. If you turn on the function then you
need to set Port Security limit to allow how many device
can access the port (via MAC address).
Port Security Action It is used to scroll to select when the device wasn’t allow to
access then switch action as trap, shutdown or trap &
shutdown.
Port Security Limit It is used to set the Port security limit, the default is 1.
Spanning Tree Admin
Edge
It is used to scroll to enable or disable the Spanning Tree
Admin Edge function on the Easy Port.
Spanning Tree BPDU
Guard
It is used to scroll to enable or disable the Spanning Tree
BPDU Guard function on the Easy Port.
Voice VLAN If you connect the IP Phone, you need to assign the Voice
VLAN ID.
The value of the port number has to be typed into the text
box.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.